No products in the cart.
0.95 INCH OLED DISPLAY MODULE FOR ARDUINO
In Stock
Categories: LED, Projects Kits/Arduino
0.95 INCH 0.95″ 7PIN FULL COLOR OLED LCD DISPLAY 96*64 MODULE SSD1331 DRIVER I2C IIC SPI SERIAL FOR ARDUINO 51
Be the first to review “0.95 INCH OLED DISPLAY MODULE FOR ARDUINO” Cancel reply
Related products
DC-DC 400W HIGH-POWER STEP DOWN BUCK CONVERTER DC 10V-60V CONSTANT VOLTAGE CONSTANT CURRENT ADJUSTABLE POWER SUPPLY MODULE
Features:
Supports 24/25/26/93 series chips, EEPROM, 25 flash BIOS chip, win7/win8.
With an ultrafast read-write speed, the BIOS programmer can read En25t80 in 3 seconds and write it in 9 seconds.
Detect and identify chip automatically; auto select the input voltage for chip; and auto off-line copying is available.
Supports the firmware upgrades of PC software and programming device; fully support 25 flash blocks, 24 EEPROM, 25 EEMPROM memory chips, 93 EEMPROM, etc.
Comes with a USB 2.0 printer cable (A Male to B Male), standard port with the speed up to 12 mbps.
Applied for the electrical maintenance of color TV/DVD/computer mainboard/hard drive memory chip, the product R&D during testing block, the flash of memory chip on a large scale, etc.
This is the most comprehensive sensors kit for Arduino lover, of course it can also be used for every project.
The kit comes with 37 different modules, sensors(input) and actuators(output).
Note: Arduino Main Board or the Compatible Arduino Main Board is not included.
Here is the list of sensors and actuators in the kit:
- 1 x 2 axis Analog Joystick
- 1 x Relay
- 1 x Big sound, big microphone for audio detection
- 1 x Small sound, small microphone for audio detection
- 1 x Tracking, small IR sensor
- 1 x Avoidance, IR sensor
- 1 x Flame
- 1 x Linear hall, hall effect sensor to detect magnetic
- 1 x Touch sensor
- 1 x Digital temperature, thermistor
- 1 x Active buzzer, audio output
- 1 x Passive buzzer, Piezo buzzer
- 1 x RGB LED, Through-hole LED
- 1 x SMD RGB, SMD LED
- 1 x Two-color, through LED
- 1 x Mini two-color
- 1 x Reed switch
- 1 x Mini reed switch
- 1 x Heartbeat
- 1 x 7 color flash, auto flash LED
- 1 x Laser emitter
- 1 x Button, push button
- 1 x Shock
- 1 x Rotary encoders
- 2 x Light cup
- 1 x Ball switch
- 1 x Tilt-switch, mercury
- 1 x Photo-resistor, LDR
- 1 x Temp and humidity
- 1 x Analog hall
- 1 x Hall magnetic
- 1 x 18B20 temp
- 1 x Analog temp, thermistor
- 1 x IR emission
- 1 x IR receiver
- 1 x Tap module
- 1 x Light blocking
ORIGINAL 3S 25A LI-ION 18650 BMS PCM BATTERY PROTECTION BOARD BMS PCM WITH BALANCE FOR LI-ION LIPO BATTERY
USB ICSP PROGRAMMER PROGRAMMING HIGH-CAPACITY MEMORIES MICROCONTROLLER PIC K150
Description
If you've been searching for distance measurement and object detection sensors at a rock-bottom price, look no further! This legendary HC-SR04 ultrasonic sensor is your perfect choice. It offers excellent range accuracy and fairly stable readings at a very low cost. It requires two digital I/O pins (an output pin and an input pin) to interface with it.
An ultrasonic sensor is created based on the principle of echolocation used by animals like bats and dolphins. Since the ultrasonic sensor uses sonar to determine the distance to an object, its operation is not affected by sunlight, spotlight, and object's surface color which will affect the readings of any infrared distance sensors. However acoustically soft materials such as clothes can be difficult to detect.
Features
-
Power Supply: 5V DC
-
Quiescent Current: less than 2mA
-
Working Current: 15mA
-
Effectual Angle: less than 15°
-
Ranging Distance : 2cm – 400 cm or 1" - 13ft
-
Resolution : up to 0.3 cm
-
Dimension: 45.3 x 20.4 x 15.4mm (not including 4-way header pins)
Packing List
-
1x HC-SR04 Ultrasonic Sensor







Reviews
There are no reviews yet.